Short answer. Most Purolite, Dowex, Amberlite, Lewatit and Diaion grades used in water treatment, hydrometallurgy and pharma have a direct XRESIN counterpart on the same polymer chemistry. The table below maps the common reference grades to XRESIN part numbers with the parameters that decide interchangeability.
Cross-reference table
Matching is by chemistry first — ionic form, matrix and structure — then by capacity and particle size. Two resins with the same headline capacity can still behave differently if the ligand or the cross-linking differs.
| Reference grade | Chemistry | Structure | XRESIN grade | Key parameters |
|---|---|---|---|---|
| Purolite C100E | Strong acid cation, gel, sulfonic | Gel styrene-DVB | XR-SAC-001 | 1.8–2.2 eq/L (H⁺); 0.3–1.2 mm uniform |
| Purolite C100 / Dowex HCR-S/S | Strong acid cation, gel | Gel styrene-DVB | XR-SAC-001 | Softening and demineralisation |
| Amberlite IR120 / Lewatit S1468 | Strong acid cation, gel | Gel styrene-DVB | XR-SAC-001 | H⁺ or Na⁺ form on request |
| Amberlite IRC86 / Purolite C104 | Weak acid cation, acrylic | Macroporous or gel | XR-WAC-003 | 3.0–4.5 eq/L (H⁺); alkalinity removal |
| Purolite A400 / Amberlite IRA402 | Strong base anion, type I | Gel styrene-DVB | XR-SBA-002 | 1.0–1.4 eq/L (Cl⁻); silica removal |
| Purolite A830 / Amberlite IRA67 | Weak base anion, free amine | Macroporous | XR-WBA-004 | 1.2–1.8 eq/L; organic guard bed |
| Purolite S950 / Amberlite IRC748 | Chelating, iminodiacetic acid | Macroporous | XR-CHL-101 | 0.6–1.0 eq/L (Cu²⁺) |
| Purolite S930 | Chelating, aminophosphonic acid | Macroporous | XR-CHL-102 | Copper and nickel removal at low pH |
| Diaion HP20 / Amberlite XAD4 | Styrene-divinylbenzene adsorbent | Macroporous | XR-ADS-201 | 400–1,000 m²/g; 0.6–1.2 mL/g pore volume |
| Purolite NRW / Amberlite IRN | Nuclear / UPW polishing mixed bed | Gel, uniform | XR-UPW-501 / XR-NUC-601 | TOC < 1 ppb typical; 1.9 eq/L cation / 1.1 eq/L anion |
Cross-reference is for shortlisting only. Validate with a column trial on your own feed before switching; specifications vary by grade and ionic form.
Why buyers ask for cross-references
Most specifications are inherited. A plant designed in 1998 names Dowex; an ultrapure water skid names Purolite; a lithium project names a Diaion adsorbent. When the original resin is discontinued, priced out of budget, or subject to a long lead time, the buyer needs a substitute that will not force a re-design of the vessel, the regeneration sequence or the effluent limits.
That is a chemistry question, not a brand question. The four things that must line up are the functional group, the matrix and porosity, the ionic form as supplied, and the hydraulic envelope (particle size distribution and uniformity coefficient).
Where substitution usually fails
Nuclear and ultrapure water. Leachables, TOC contribution and the conversion rate to H⁺/OH⁻ forms dominate performance. A general-purpose grade with the right capacity will still fail the outlet specification.
Condensate polishing. Kinetics and fines content matter more than total capacity; a slower resin increases the rinse volume after regeneration.
Chelating at low pH. IDA and aminophosphonic ligands have different pH operating windows. Substituting one for the other changes the recovery and the selectivity order.
Certified potable water. If the specification requires NSF/ANSI 61 or WQA Gold Seal, the substitute must carry the certification for the same grade — the certificate scope has to name it.
How to run the substitution test
Request a paid sample of the candidate grade in the same ionic form, then run at least ten cycles on the real feed. Record operating capacity to breakpoint, regeneration ratio, rinse volume, pressure drop and attrition. Compare against the incumbent on cost per cubic metre treated rather than price per kilogram — the price guide explains how regeneration chemicals usually dominate the five-year cost in demineralisation.
Frequently asked
What is the equivalent of Purolite C100E?
Purolite C100E is a gel-type strong acid cation exchange resin with sulfonic acid functional groups on a styrene-divinylbenzene matrix. The nearest XRESIN grade is XR-SAC-001, a uniform-particle gel strong acid cation resin with 1.8–2.2 eq/L total exchange capacity in the H⁺ form. Equivalence must be confirmed by column trial, because regeneration efficiency and pressure drop depend on the full specification, not the headline capacity.
Can I replace Dowex HCR-S/S with a Chinese resin?
Yes, in most demineralisation and softening duties. Dowex HCR-S/S is a gel strong acid cation resin; XR-SAC-001 matches the chemistry and exceeds it on particle uniformity when the uniform grade is specified. For condensate polishing, compare the kinetic performance and the fines content rather than capacity alone.
Are chelating resin equivalents interchangeable between brands?
Only within the same ligand family. Iminodiacetic acid (IDA) resins such as Purolite S950 or Amberlite IRC748 map to XR-CHL-101, while aminophosphonic resins such as Purolite S930 map to XR-CHL-102. IDA and aminophosphonic resins behave differently at low pH, so the ligand must match before capacity is compared.
How should a cross-reference be validated?
Run a column trial on the actual feed: measure operating capacity to the breakpoint, regeneration chemical consumption, rinse volume, pressure drop and attrition over several cycles. A cross-reference table narrows the shortlist; it does not replace a pilot test.